` Threaded Lateral

Threaded Lateral
Size: 1/2" NPS TO 2-1/2" NPS (2000LB), 1/2" NPS TO 2" NPS (3000LB) Class: 2000LB, 3000LB (SCH80/XS,SCH160) Standards: ASME B16.11 Material: Stainless Steel :ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L Duplex & Super Duplex Steel:ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61 Carbon Steel:ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65,ASTM A350, LF2, LF3 Alloy Steel:ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91 Copper Alloy Steel : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200 Nickel Alloy:ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)

Threaded Lateral Dimension

2000LB

DN	Nom.Pipe Size	Length of Thread(Min.)		A	E	G² (Min.)	H²
DN	Nom.Pipe Size	B³	L2³	A	E	G² (Min.)	H²
15	1/2"	10.9	13.6	46	20	3.18	33
20	3/4"	12.7	13.9	55	23	3.18	38
25	1"	14.7	17.3	65	26	3.68	46
32	1-1/4"	17.0	18.0	73	31	3.89	56
40	1-1/2"	17.8	18.4	82	35	4.01	62
50	2"	19.0	19.2	113	42	4.27	75
65	2-1/2"	23.6	28.9	136	56	5.61	92

3000LB

DN	Nom.Pipe Size	Length of Thread(Min.)		A	E	G² (Min.)	H²
DN	Nom.Pipe Size	B³	L2³	A	E	G² (Min.)	H²
15	1/2"	10.9	13.6	55	23	4.09	38
20	3/4"	12.7	13.9	65	26	4.32	46
25	1"	14.7	17.3	73	31	4.98	56
32	1-1/4"	17.0	18.0	82	35	5.28	62
40	1-1/2"	17.8	18.4	113	42	5.56	75
50	2"	19.0	19.2	136	56	7.14	84

(1) Dimensions in Millimeters.

(2) Dimensions refer to ANSI B16.11

(3) Dimensions B is minimum length of perfect thread.

The length of useful thread(B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American National Standard for pipe threads(ANSI/ASME B1.20.1)

(4) Dimensions of BSP and PTare available if required.

(5) Dimensions may vary according to the customer's and manufacturer's requirement.

Inquiry

Products List

Contactor information

Products
Home `>>` Products `>>` Threaded Fittings `>>` Threaded Lateral

Products List

Contactor information

ProductsHome >> Products >> Threaded Fittings >> Threaded Lateral

Products
Home `>>` Products `>>` Threaded Fittings `>>` Threaded Lateral